Apogee CCD Camera Alta U1 768x512 9u USB Camera Class 2 D01F-VS25D-U00402-MM2A
Item No. 752-02003 Manuf. No. Apogee D09F-MG63D-UA1001-MN1A
Special Order Item
The Alta U1 768x512 9u USB camera-Class 2 has a Kodak Blue Plus full-frame sensor with very high quantum efficiency. Low noise and high sensitivity are ideal for OEMs, biological science, spectroscopy and astronomy. - 768 x 512 array, 9 x 9 micron pixels
- 5 MHz 12-bit and 1 MHz 16-bit digitization
- 32Mbyte camera memory
- USB 2.0 interface: no plug in cards or external controllers
- Programmable, intelligent cooling to 50C below ambient
- Binning up to 10 Horizontal x 512 Vertical
- Subarray readout and fast sequencing modes
- Precision time delayed integration readout
- Programmable fan speed for low / zero vibration
- Two serial port outputs for control of peripheral devices
- General purpose programmable I/O port
- External triggering and strobe controls
- ActiveX drivers and MaxIm DL/CCD software included with every system
- Field upgradeable firmware
- Self-test capability with data simulators
- Fused silica windows
- Runs from single 12V supply with input voltage monitor
- Compact enclosure
- Programmable status indicators
MaxIm DL/CCD and CCDSoft software packages are offered at special prices when purchased at the same time as a camera system.
CCD Specifications - CCD: KAF-0402ME
- Array Size (pixels): 768 x 512
- Pixel size: 9 x 9 microns
- Imaging area: 6.912 x 4.608 mm (31.9 mm2)
- Imaging diagonal: 8.31 mm
- Linear Full Well (typ.): 100,000 e-
- Dynamic Range: 76 dB
- QE @ 400 nm: 53%
- Peak QE (600 nm): 85%
Camera System Performance PC Interface: USB 2.0 Max. cable length: 5 meters between hubs; 5 hubs maximum (max. total of 30m) Digital resolution: 16 bits at 1 MHz and 12 bits at 5 MHz System Noise (typ.): 15 e- RMS at 1 MHz; <2 counts at 5 MHz Pixel Binning: 1x1 to 10 x 512 on-chip Exposure Time: 10 milliseconds to 183 minutes (2.56 microsecond increments) Image Sequencing: 1-65535 image sequences under software control Frame Sizes: Full frame, subframe, focus mode Cooling: Thermoelectric cooler with forced air. Maximum cooling 50 degree C below ambient temperature Temperature Stability: +/-0.1 degree C Dark Current (typ.): 0.5 e-/pixel/sec (-30 degree C) Camera Head: Standard: D1; Low profile: D5. Aluminum, hard blue and black anodized. 6" x 6" x 2.1" (15 x 15 x 6.25 cm). Weight: 3.1 lb. (1.4 kg) Mounting: 3.5" bolt circle. C-mount (1ý 32 tpi thread). Optional Nikon or Canon lens mount. Back focal distance: Standard: 0.69ý (1.75 cm). Low profile: 0.46ý (1.22 cm) [optical] Operating Environment: Temperature: -30 degree to 80 degree F. Relative humidity: 10 to 90% noncondensing Cable length: Standard: 15 ft (4.5m) Power: 40W maximum power with shutter open and cooling maximum. Power supplied by AC/DC "brick" supply with international AC input plug. Alternate 12V input for userýs source. Shutter: Standard: Vincent 25mm. Low profile: no shutter. Remote Triggering: LVTTL input to camera allows exposure start within 25 microseconds of rising edge of trigger
|