Apogee CCD Camera Alta E1 768 x 512 9u Ethernet Camera Class 1 D01F-VS25D-E00261-MM1A
Item No. 752-02004 Manuf. No. Apogee D09F-MG63D-UA1001-MN2A
Special Order Item
The Alta E1 is a small format front-illuminated sensor with extraordinarily high quantum efficiency. Low noise and small pixels are ideal for low light applications and low magnifications. - 768 x 512 array, 9 x 9 micron pixels
- 1 MHz 16-bit digitization to 24Mbyte camera memory
- 100Base-T Ethernet interface: up to 200 kpixels/sec throughput to host computer
- TCP/IP protocol
- DHCP or fixed IP addressing
- No plug in cards or external controllers
- Programmable cooling to 50? C below ambient
- Binning up to 10 Horizontal x 512 Vertical
- Multi-track and subarray readout modes
- Precision Time Delayed Integration readout
- Programmable fan speed for zero vibration
- Two serial port outputs for control of peripheral devices
- General purpose programmable I/O port
- External triggering and strobe controls
- ActiveX drivers included with every system
- Fused silica windows
- Field upgradeable firmware
- Extensive self-test capability
- Runs from single 12V supply
MaxIm DL/CCD and CCDSoft software packages are offered at special prices when purchased at the same time as a camera system.
CCD Specifications - CCD KAF-0402ME
- Array Size (pixels) 768 x 512
- Pixel size 9 x 9 microns
- Imaging area 6.912 x 4.608 mm (31.9 mm2)
- Imaging diagonal 8.31 mm
- Linear Full Well (typ.) 100,000 e-
- Dynamic Range 76 dB
- QE @ 400 nm 53%
- Peak QE (600 nm) 85%
Camera System Performance - PC Interface 100Base-T Ethernet
- Max. cable length 100 meters
- Digital resolution 16 bits at 1 MHz (to internal camera memory)
- Throughput 200 kpixels/sec in TCP/IP mode
- System Noise (typical) 15 e- RMS at 1 MHz
- Pixel Binning 1x1 to 10 x 512 on-chip
- Exposure Time 30 milliseconds to 10,400 seconds (2.56 microsecond increments)
- Frame Sizes Full frame, subframe, focus mode
- Cooling 2-stage thermoelectric cooler with forced air. Maximum cooling 50? C below ambient temperature
- Temperature Stability ?0.1? C
- Dark Current (typ.) 0.05-0.1 e-/pixel/sec (-30? C)
- Camera Head Standard: D1; Low profile: D5. Aluminum, hard blue and black anodized. 6" x 6" x 2.1" (15 x 15 x 6.25 cm). Weight: 3.1 lb. (1.4 kg)
- Mounting 3.5" bolt circle, 8-32 thread. C-mount (1? 32 tpi thread). Optional Nikon or Canon lens mount.
- Back focal distance Standard: 0.69? (1.75 cm). Low profile: 0.46? (1.22 cm) [optical]
- Operating Environment Temperature: -22? to 27? C. Relative humidity: 10 to 90% noncondensing
- Power 40W maximum power with shutter open and cooling maximum. Power supplied by AC/DC ?brick? supply with international AC input plug. Alternate 12V input for user?s source.
- Shutter Standard: Vincent 25mm. Low profile: no shutter.
- Remote Triggering LVTTL input to camera allows exposure start within 25 microseconds of rising edge of trigger.
|