STARLIGHT INSTRUMENTS FEATHER TOUCH 2" 2SPD FOCUSER, 2.5"TRAV, BRK, C-RING--GOLD ANOD. FTF2025BCR-XGOLD
Item No. 734-10010
Free Shipping (within the 48 contiguous US States only)
Manuf. No. Starlight Instruments FTF2025BCR-XGOLD
Starlight Instruments Labs is very excited to present this Feather Touch 2.0" Dia Dual Speed 2.5" DTT, Brake, CRing done in a special Gold-Tone Annodized finish.
Back by popular demand, we've got more gold! Get yours before they're gone.
Our 2.0" Series:
In general, 2.0" Feather Touch Focusers can be used on refractor-style telescopes, they can also be used with Newtonians in certain situations depending on where the focal point resides.
Basic Componants of the Feather Touch 2.0 inch Diameter Focuser In our standard model, the base of the adapter is not threaded, instead it uses a 2.7" flange type connector. A base-adapter or tube adapter ring (TAR) is required in all cases for installing the focuser onto your telescope. Optional mounting base adapters are available for installing the focuser on catadioptric rear cells as well as on reflector optical tubes and truss-tube Dobsonian secondary mirror cages.
There are coarse and fine focus knobs with an approximate reduction ratio of 10:1 for unrivaled accuracy and repeatability. Each revolution of the fine focus knob results in a mere 0.070 inches of drawtube travel, making critical focus effortless. Fine focus repeatability is on the order of <0.0005 inches.
Our Compression Ring Option:
This non-marring design will not scratch the barrels of your eyepieces, as a conventional thumbscrew eyepiece holder can. The compression ring also has improved holding power over conventional thumbscrews, even nylon-tipped thumbscrews.