Astro-tech ED Triplet 130mm f/6 Refractor Telescope OTA w/2.7" Focuser, Case-white, AT130
Item No. 658-12140
Manuf. No. Astro-Tech AT130
Astronomy Technologies Astro-Tech OTA 130mm f/6 FPL-53 ED triplet apochromatic refractor telescope, white, AT130
The performance of this Astro-Tech 130mm FPL-53 ED (Extra-low Dispersion glass) triplet apochromatic refractor is superb, in keeping with Astro-Techııs well-deserved reputation for producing optically and mechanically excellent optics. A representative took one to the 2010 Winter Star Party. Its performance was so well received that it sold within an hour of seeing its first light.
All of the lenses in the air-spaced triplet optics of the AT130 are fabricated from Ohara glass (Ohara is Japanııs premier manufacturer of specialized optical glass), including the first-quality FPL-53 center element.
The result of using the best possible glass is the finest possible control of spurious color. The AT130 images are free of all vestiges of the annoying faint color halos around bright objects visible in lesser scopes ıC despite the Astro-Techııs fast focal ratio, and even at very high magnifications.
Those exceptional optics come in a finely-machined body with a newly-designed dual speed 2.7" linear Crayford focuser with a microfine 10:1 fine-focusing ratio. The focuser can rotate a full 360 degree to put your camera or eyepiece in the most comfortable observing position. The supplied 2" and 1.25" eyepiece holders use non-marring brass compression rings that wonııt scratch your eyepiece barrels. The Astro-Tech AT130 has a retractable lens shade and comes in a locking aluminum-frame carrying case.
Features of this Telescope
Collimatable apochromatic triplet refractor optics: 130mm (5.12") aperture, 780mm focal length, f/6 focal ratio. Three-lens air-spaced optical system using the finest quality FPL-53 ED (Extra-low Dispersion glass) element to reduce spurious color halos and fringing to vanishingly low levels. All three lens elements are made from the finest quality Ohara glass. Ohara is well-known as Japanııs premier manufacturer of specialized optical glass. The lens cell is fully collimatable for peak performance.
Fully multicoated optics: The triplet objective lens has the latest state-of-the-art antireflection multicoatings on all air-to-glass surfaces for high light transmission and excellent contrast. This can easily be seen by looking into the objective lens of the scope. Virtually no reflection of your face will be seen. Itııs a sure sign that the high transmission coatings are doing their job, by letting virtually all the light enter the scope, rather than reflecting some light back to your eye.
Internal light baffles: Contrast-enhancing knife-edge light baffles in the lens shade and the optical tube provide truly dark sky backgrounds and high terrestrial contrast. The edges of the lenses are blackened to reduce internal reflections and further improve image contrast.
Dew shield: A self-storing retractable dew shield slows the formation of dew on the lens in cold weather to extend your undisturbed observing time. It also improves the contrast, similar to the effect of the lens shade on a camera lens, when observing during the day or when there is excessive ambient light at night, such as a neighborııs backyard security light. The tube measures a 27.25" long with the dew shield retracted, and 32" long with it extended. A lock knob under the dew shield locks it firmly in place when fully extended.
Dual speed microfine 2.7" linear Crayford focuser: The precision-made focuser has dual-speed focusing. There are two coarse focusing knobs. The right knob also has a smaller concentric knob with 10:1 reduction gear microfine focusing ratio. This provides exceptionally precise image control during high magnification visual observing and critical 35mm or CCD imaging. The focus knobs have ribbed gripping surfaces so they are easy to operate, even while wearing gloves or mittens in cold weather.
The focuser has dual-speed focusing. There are two coarse focusing knobs. The right knob also has a smaller concentric knob with a 10:1 reduction gear microfine focusing ratio. This provides exceptionally precise image control during critical imaging. All focus knobs are ribbed, so they are easy to operate, even while wearing gloves or mittens in cold weather. A lock knob underneath the focuser lets you adjust the tension on the drawtube to accommodate varying equipment loads. A large lock knob on top of the focuser lets you lock in your photographic focus.
The new linear bearing focuser of the AT130 has a polished stainless steel drive rail that runs the length of the underside of the drawtube. The focuserııs stainless steel drive shaft presses on this drive rail to move the focuser, rather than having the hard steel drive shaft press directly on (and wear out) the softer aluminum drawtube as with conventional Crayford focusers. The steel drive rail rides in a self-lubricating track that extends almost the entire length of the focuser body. The drive rail and its attached drawtube are thereby supported over most of their length at all times, rather than by a conventional Crayford focuserııs two sets of small contact area roller bearings. This system distributes the drive force evenly over the entire drawtube, without concentrating it on a few small contact points. The result is a very rigid drawtube with essentially zero flexure and no wear (much less flat spots or uneven wear) on the focuser drawtube.
The entire AT130 focuser can be rotated a full 360ıı for photographic composition purposes and locked in place at any desired angle. In addition, the 2.7" diameter focuser drawtube itself terminates in a separate built-in camera angle adjuster as standard equipment. It is not an optional extra-cost accessory, as it is with some other scopes. The camera angle adjuster lets you rotate the focuser to line up a camera in either a landscape or portrait orientation (or any orientation in between), as well as put a star diagonal and eyepiece into the most comfortable observing position. A knob on the camera angle adjuster lets you lock the focuser at whatever angle is most convenient for you.
The 80mm (3.15") travel focuser drawtube has a scale marked in 1mm increments so you can note individual focuser positions for easy return to the correct focus when switching between visual use and photography. The focuser has adjustable tension to accommodate varying equipment loads. A separate lock knob under the focuser lets you lock in your photographic focus.
2" and 1.25" compression rings accessory/eyepiece holders: The 2.7" drawtube terminates in a 2" accessory/eyepiece holder that uses a non-marring soft brass compression ring to hold a 2" star diagonal and accessories in place. The compression ring wonııt scratch the barrel of your star diagonal and accessories as an ordinary thumbscrew can. For 2" eyepiece use, an Astro-Tech one-piece body guaranteed 1/10th wave peak-to-valley accuracy 2" quartz star diagonal (#AT2DQ1) is recommended to deliver all of the scopeııs exceptional optical performance to your eye.
A standard equipment 1.25" accessory/eyepiece adapter slips into the 2" accessory holder on the focuser drawtube to let you use a 1.25" star diagonal or image erecting diagonal. Like the 2" eyepiece holder, the 1.25" adapter also uses a non-marring soft brass compression ring to hold 1.25" star diagonals and accessories in place. If you are partial to 1.25" eyepieces and need an outstanding diagonal for this scope, consider the Astro-Tech 1.25" dielectric diagonal (#AT1D). It was named a Sky & Telescope Hot Product for 2007.
Tube finish: The optical tube and lens shade are finished in a durable high gloss automotive-style white paint, the same as that used on scopes double the price of the AT130. The focuser and trim are anodized gun metal grey.
Other supplied accessories: A slip-on metal dust cap is standard. There is no finderscope provided, but a threaded hole on the upper left side of the optical tube permits the installation of an optional multiple reticle red dot finder (#ATF). The finder mounting hole is sealed with a slotted-head threaded insert to prevent the entrance of dust into the scope when no finder is installed.
Recommended mounts: Because of the 19.75 pound weight of the AT130 (including optional #AT142R tube rings, but without mounting dovetail), plus the weight of your ancillary visual or photographic accessories, a quality German equatorial mount with a 30 pound or higher payload capacity is recommended. Such mounts include the 40 pound capacity Celestron CGEM and the Losmandy 30 pound capacity GM8 or GM8GT go-to. Other suitable mounts are also available.
This Astro-Tech AT130 refractor has:
- 130mm f/6 fully multicoated air-spaced triplet apochromatic optics using an FPL-53 ED element and all Ohara glass
- collimatable lens cell
- rotating dual-speed 2.7" Crayford focuser with 10:1 ratio fine focusing
- both 2" and 1.25" brass compression ring eyepiece holders
- retractable lens shade/dew shield
- long-lasting white paint finish with anodized grey trim
- aluminum-frame foam-fitted hard case
- two-year warranty
- Highest Useful Magnification 260x
- Visual Limiting Magnitude 13.1
- Focal Length 780 mm
- Focal Ratio f/6
- Resolution 0.89 arc seconds
- Aperture 5.12"
- Heaviest Single Component 16.55 lbs.